TRUCK EXPLORER™ is an ultimate vehicle ECU management product with wide range of functions. Designed for workshops, locksmiths and independent professionals working with commercial vehicles. Extremely useful for chip tuners, vehicle electronics repair engineers, locksmiths and automotive education.
This is a Tool for special operations on Mercedes-Benz, MAN, MAZ, CLASS (SCANIA, VOLVO will be soon), trucks and buses. It allows to read/write FLASH and EEPROMs from MR (PLD/FFR/PTM) control unit, program new keys, calculate VeDoc (X1, X2, X8...) and FDOK (XT, XN) access codes. All operations are done via OBD and offline, no internet connection required.
TRUCK EXPLORER Chiptuning pack features:
- PLD (MR) external FLASH & EEPROMs Read&Write raw format; Checksum automatic recalculation; Chip-tuning protection remove.
- MEMO; KEYS; CALC; DC2 functionality with Continental PLD based on XC2xxx processor type. PLD firmware v.: 22B; 23E; 24B.
- MEMO; KEYS; CALC; DC2 functionality with Continental PLD firmware v.: 23F; 24C; 25B, 26x.
- Flash & EEPROM Read/Write TEMIC CR (MCM). MCM1, MCM2, ACM1, ACM2- Flash & EEPROM Read / Write. DC2 required.
- Operations by Direct Connection 2 cable.
- S, ML, GL class CRV & CRV2 Flash & EEPROM Read/Write via OBD.
- V-class CR1 Flash & EEPROM Read / Write; WSP<>CR pairing.
- Speed limit R/W; Torque limit R/W; AdBlue error Erase.
- Fault codes Read&Erase; All code descriptions are up to date.
- Truck Explorer Android license.
Supported languages: English, German, Russian, Lithuanian, Turkish, Arabic, Persian, French, Spanish, Portuguese.
- Hardware: VEI V5 WiFi, USB A-B, Micro USB cable, OBD2F-4-MB14, DirectConnect2 tool, PLD16 cable for DC2, DC2-ISP1 cable, DC2-OBD2PW cable, DC2-MCM+ACM cable.
- Licenses: ME MEMO, 2011+, 2014+, MCM BSL (3Core), DC2, CRV, CR (CDI), EXTRA, DIAG.
- Support and updates service for 12 months is included.
- VEI V5 WIFI device has 12 months warranty.
1.License MBH01 (ME MEMO)
The license allows to Read/Write FLASH and EEPROMs of MR (PLD) control unit.
It is possible to connect to the unit via:
- OBD (MR is mounted inside truck) or
- direct connection with DirectConnect 2 tool (MR is placed on your table).
This function is especially useful for chip-tuning works and recovering unit after the broken update. All operations are done via OBD, there is no need to decapsulate/open the unit, so unit stays in factory condition and therefore no warranty is voided.
This function allows cloning MR. You read one MR, save to *.bin file, and write it to another MR.
2.License MBH04 (2011+)
For PLD memory read and write operation (category memo) PLD with XC2287 secured microprocessor. Open access Read & Write memory for PLD, made on 2011 and later, with microprocessor Infineon XC2287. Software module support PLD with firmware versions: 22B, 23E, 24B. Doesn’t support PLD what have firmware versions: 21x, 23F, 24C, 25x, 26x these versions are covered by additional license.
3.License MBH13 (2014+)
For PLD memory read and write operation (category memo) PLD with XC2287 secured microprocessor.
Open access Read & Write memory for PLD, made on 2011 and later, with microprocessor Infineon XC2287.
Software module support PLD with firmware versions: 21x, 23F, 24C, 25x, 26x.
Note: DirectConnect2 tool is needed.
4.License MBH16 MCM BSL (3Core)
A license for Read & Write IntFLASH; IntEEPROM; ExtEEPROM MCM1, MCM2 and ACM control units memory only over DirectConnect 2 tool.
Type 1. Continental MCM1 (MCU TC1796-256F / TriCore 1 EEPROM M95640) plastic.
Type 2. Continental MCM2 (MCU TC1796-256F / TriCore 1 EEPROM M95128) metallic
Note: DirectConnect2 tool is needed.
5.License CLH02 (DC2)
New generation DirectConnect tool (DC2) for different vehicle control modules programming without complete vehicle system.
ISP helps Read & Write unknown or damaged firmware from vehicle control units. BSL mode, TriCore BL mode, Motorola BKG mode, NEC serial BL ready.
Read/write PLD, MCM, FR, FFR. Learn a key for PLD, FFR. To have all options you need to have appropriative licenses.
6. License MBL01 (CRV)
The license allows to Read/Write FLASH & EEPROMs of CRV1 & CRV2 engine control unit of Mercedes S, ML, GL class via OBD2.
7. License MBV01 (CR(CDI))
The license allows to Read/Write FLASH & EEPROMs of CDI engine control unit used in MB V-class, Sprinter and Vito thru the diagnostic port. CDI<>WSP pairing.
8. License MBH08 (EXTRA)
Set a speed limit. Applicable for CPC drive control modules.
NOx torque limit. FR and CPC.
Erase exhaust faults (AdBlue system fault source repair must be done firstly).
9. License MBH00 (ME DIAG)
The license allows to Read DTC with the error description.
Clear DTC. Read and Erase fault codes.
VAN's on this moment not supported.
Shipping worldwide with DHL is 80 EUR.